一条数据线走过的路

关于数据线，相必大家并不陌生，它几乎随处可见。那一条数据线它是走过一怎样的路来到我们面前呢？这一不为人知的故事，是时候现于人前了。

为了保证数据线在使用过程中的安全性和可靠性，一条数据线它定是走过这些检测仪器的路。

Everyone is familiar with the data cable phase, it can be seen almost everywhere.How did the data cables come to us? It's time for this unknown story to appear before others.

In order to ensure the safety and reliability of the data cable during use, a data cable must be the way through these testing equipments.

HD-B609B-S电脑控制万能材料试验机，专业适用于塑料薄膜、复合材料、软质包装材料、塑料软管、胶粘剂、保护膜、金属箔、隔膜、无纺布、橡胶、纸张等产品的拉伸、剥离、撕裂、粘合、穿刺力、拔开力等性能测试。是物性试验、教学研究、质检等*的检测设备。

将数据线垂直悬挂于拉力试验机上固定，尾端悬挂上重物，悬停持续1分钟时间。若数据线外观无明显不&良，接线头无松动现象，功能良好，摇晃接口端无接触不&良，检验合格。

HD-B609B-S desktop tensile test machine with PLC controller is professionally specialized in plastic film, composite, soft packaging materials, plastic hose, adhesive, protective film, composite cover, diaphragm, non-woven fabric, rubber, paper and other products of tensile, peeling, tear, bonding, puncture force, pull force and other performance tests.It is an indispensable testing equipment for physical testing, teaching research, quality inspection and so on.

Hang the data cable vertically on the tensile testing machine to fix it, and hang a heavy object on the tail end, and the hovering lasts for 1 minute. If there is no obvious defect in the appearance of the data cable, no loosening of the connection head, good function, and no bad contact when shaking the interface end, it means the inspection is qualified.

HD-E702可程式恒温恒湿试验箱可提供较宽的温度和湿度控制范围。它用于模拟恶劣的高温，低温或潮湿的热环境。客户可以根据性能和测试区域容量选择合适的模型。

它被广泛用于各种行业，例如电子仪器仪表，新材料，电工，车辆，金属，电子产品，航空航天材料，这些在运输，存储和使用过程中可能会遇到环境条件。

将数据线放置于试验箱中8个小时，然后在正常气候条件下恢复2小时。若外观无异常，数据线端子无腐蚀，检验合格。

HD-E702 constant temperature and humidity chamber provides a wide temperature and humidity control range.It is using to simulate severe high temperature, low temperature or damp heat environment. Customer can select suitable models based on performance and test area capacity. 

It is widely used in various industries, such as electronic instruments and meters, new materials, electricians, vehicles, metals, electronic products, aerospace materials , which may encounter environmental condition during transportation, storage, and in-using.

Place the data cable in a test chamberfor 8 hours, and then restore it for 2 hours under normal weather conditions. If there is no abnormal appearanceandthe data cable terminal is not corroded, it means the inspection is qualified.

HD-E808采用盐雾腐蚀的方式来检测被测样品耐腐蚀的可靠性，是人工气候环境“三防”（湿热、盐雾、霉菌）试验设备之一，是研究机械、国防工业、轻工电子、仪表等行业各种环境适应性和可靠性的一种重要试验设备。

将数据线放于试验箱中24 个小时。试验完成后取出试件，尽快用清水洗去粘附的盐粒，用毛刷或海绵除去其它腐蚀生成物，使用不含油雾的压缩空气吹干试件，并在常温下回温24h。若数据线端子无腐蚀，检验合格。

HD-E808 adopts salt spray corrosion method to detect the reliability of the corrosion resistance of the tested sample. One of the test equipment (humid heat, salt spray, mold) is an important test equipment for studying the adaptability and reliability of various environments in the machinery, defense industry, light industry and electronics, instrumentation and other industries.

Put the data cable in the test chamber for 24 hours. After the test is completed, take out the test piece, wash off the adhering salt particles with clean water as soon as possible, remove other corrosion products with a brush or sponge, blow dry the test piece with compressed air without oil mist, and return to temperature at room temperature for 24 hours. If the data cable terminal is not corroded, the inspection is qualified. If the data cable terminal is not corroded, it means the inspection is qualified.